Insulated Glass Unit Storage Rack

The IG Unit Storage Rack is available in rack sizes of 25, 45, 50,  55 and 60 slots.  The floor is flat with glass handling controlled by a duel set of fixed dividing rods.  Rack base and back vertical members are welded construction, arms are bolted to the vertical back and the harp strings are vinyl tube covered.   Harp strings are removable so that vinyl tubing can be replace when its becomes worn.  Racks are stack able to ten high for economical shipment.  A slot numbering system is optional at a modest cost.  Rack is mounted on four casters  ( two swivel & two fixed ).   Rack flooring consists of four ( 4 ) strips of HDPE glass contact surfaces.

Rack is shipped with arms, harp strings and casters removed.    Assembly only requires the installation of four ( 4 ) caster and the bolting on of the two arms plus installation of the covered harp strings.   All hardware required for assembly is included.

SPECIFICATIONS:
Height: 63"
Depth:  42" ( 40" deep from front edge of rack to glass stop bar )
Length:  45 Slot @ 74",  50 Slot @ 81.5",  55 Slot @ 89",  60 slot @ 95.5"
Weight:  45 Slot @ 325 lbs,  50 Slot @ 355 lbs<  55 Slot @ 380 lbs<  60 Slot @ 405 lbs 
Rack has a storage slot width of 1 1/16"
Load Capacity is 3,000 pounds
Rack Frame:  Welded Tubular Steel
Rack Base:  Four ( 4 ) HDPE Strips mounted on OBS Backer Board
Harp Strings:  5/16" Diameter Removable Steel Rods covered with PVC Tubing
Tubing:  Strings Removable for PVC Tubing Renewal
Minimum Glass Size:  18 Inches Square
Maximum Glass Size:  38 x 72 Inches