Automatic Seal Applicator
Table
Table designed to enable manufacturing personnel to quickly apply sealing spacer to the
first glass lite of an insulated unit.
Automatic cup movement TOWARD and AWAY from the operator
during lite rotation assures that the glass edge remains on the table and
positioned correctly so that the sealing operator can work quickly &
efficiently.
For operator safety cup rotation is manual. Table is equipped with 3 HP full plenum air
flotation for ease of glass movement.
Superior construction to insure high reliability and
maintenance free operation.
OPERATING SEQUENCE OF APPLICATOR
TABLE:
The operator slides a glass lite onto the table
and centers the lite over the vacuum cup.
He presses a foot pedal switch raising the vacuum cup that adheres to
the glass lite. Operator then applies
the sealing tape to the first lite, presses a foot switch to turn the
glass. As the operator turns the glass lite , the applicator table automatically maintains the edge
of the glass onto the table surface and locks at 90 degrees.
At all times the glass edge is positioned to the front edge of the table
so that operator can efficiently apply sealing tape. Glass positioning movements are repeated
three times during the sealing cycle.
After the last side is completed, the vacuum cup is released by
activating the foot pedal switch. The
first lite with sealing tape attached can now be pushed onto a Tilt Top Grid
Assembly Table.
MECHANICAL
FEATURES OF TABLE:
Table available in 60" x 60" , 72" x
72", 84" x 84", 96"
x 96" or 108" x 108" Sizes.
Table frame fabricated from 3" x 2" heavy wall tubular
steel. Frame is 100% MIG welded
construction.
Equipped with Plenum Air Flotation Unit and a dedicated Air
Supply Source for operating the applicator tool.
Equipped with dual compressed air filters and automatic
valves for dumping water accumulated in the filter bowls.
Cup actuating cylinder is pneumatic rodless
type for exceptionally smooth operation.
Operating Sequence is PCL Controlled for improved Process
and Mechanical Reliability.
Table
is equipped with a heavy duty Linear Way System and Pneumatic
Cylinder for movement
of Vacuum Cup Holding Mechanism.
Heavy construction for long life & maintenance free operation of table.
All table edges are
trimmed with renewable nylon edging to prevent damage to table top covering.
