Premium Automatic Seal Applicator Table

Premium Table designed to enable manufacturing personnel  to quickly apply sealing spacer to the first glass lite of an insulated unit and align and top second lite onto the first lite.  Table is identical is standard Automatic Applicator Table but also has extra functional features to include a) Grid Top, b ) three ( 3 ) Pop Up Alignment Stops and c) Vacuum Hold Down.

Automatic cup movement TOWARD and AWAY from the operator during lite rotation assures that the glass edge remains on the table and positioned correctly so that the sealing operator can work quickly & efficiently. 

• For operator safety cup rotation is manual.   Table is equipped with 3 HP full plenum air flotation for ease of glass movement.   Superior construction to insure high reliability and maintenance free operation.

The operator slides a glass lite onto the table and centers the lite over the vacuum cupand presses a foot pedal switch raising the vacuum cup that adheres to the glass lite.   Operator then applies the sealing tape to the first lite, presses a foot switch to turn the glass.   As the operator turns the glass lite , the applicator table automatically maintains the edge of the glass onto the table surface and locks at  90 degrees.  At all times the glass edge is positioned to the front edge of the table so that operator can efficiently apply sealing tape.    Glass positioning movements are repeated three times during the sealing cycle.  After the last side is completed, the vacuum cup is released by activating the foot pedal switch.   The first lite can now be aligned with pop up stops, mutton bars installed in first lite and the second lite topped over first lite.  IG unit can be transferred to heat press.

MECHANICAL  FEATURES  OF  TABLE:

• Table available in 84" x 84" Size.  Frame is 100% MIG welded construction.   Equipped with Plenum Air Flotation Unit and a dedicated Air Supply Source for operating the applicator tool.  Equipped with dual compressed air filters and automatic valves for dumping water accumulated in the filter bowls. 

• Cup actuating cylinder is pneumatic rodless type for exceptionally smooth operation with  Operating Sequence is PCL Controlled for improved Process and Mechanical Reliability. 

• Table  is equipped with a heavy duty Linear Way System and rodless Pneumatic Cylinder  for  movement  of Vacuum Cup Holding Mechanism.   All table edges are trimmed with renewable nylon edging to prevent damage to table top covering.

• Equipped with Vacuum Hold Down.  Equipped with Hard Surface Grid Cut Top.   Grids cut on 5/8" centers.

• Equipped with three ( 3 ) Pop Up Alignment Stops.

*All Items shown in bold highlight are extra operating features incorporated into the Premium Applicator Table.